Description
1-pc. molded epoxy coil enclosures have built-in 1/2″ NPT conduit hubs with strain relief. Use high-flow valves for liquid, corrosive, and air/inert gas service applications—including car washes, air compressors, pumps, laundry equipment, and industrial water control. Max. ambient temp.: 140°F. Normally closed valves. CSA Certified.
- Pipe Size – Valves: 1 in
- Center Line Pipe Center Size: 4 in
- Electrical Connections: 1/2″ Conduit w/18″ Leads
- Valve Design: 2-Way/2-Position
- Voltage: 24V DC
- Item: Solenoid Valve
- Orifice Dia.: 1 in
- Valve Configuration: Normally Closed
- Body Material – Valves: Brass
- Seal Material: NBR
- Max. Operating Pressure Differential Air/Inert Gas: 125 psi
- Coil Insulation Class: F
- Coefficient of Volume: 13.0
- NEMA Rating: 1, 2, 3, 3S, 4, 4X
- Watts: 11.6 W
- Valve Ways and Positions: 2-Way/2-Position
- Media: Air/Inert Gas, Light Oil and Water
- Coil Enclosure: Watertight No Junction Box
- IP Rating: 66
- Pipe Size: 1″
- Max. Operating Pressure Differential Water: 125 psi
- Seal Material – Valves: NBR
- Overall Width: 3 3/8 in
- Min. Operating Pressure Differential: 5 psi
- Environmental Rating – Valves: Indoor, Outdoor
- Overall Length: 3 3/4 in
- Body Material: Brass
- Max. Operating Pressure Differential Light Oil: 125 psi
- Overall Height: 5 5/8 in
- Application: Air Compressors, Car Wash, Industrial Water Control, Laundry Equipment, Pumps
- Max. Fluid Temp.: 150 Degrees F
- Center L”e Pipe Center Size: 4″
ASCO 2W N.C. BRASS VALVE
1″ NPT W/120VAC COIL
